CENTRIFUGES

Manual Top Discharge

One of the simplest types of centrifuge widely used in the industry. The solid material is scooped out manually from the top of the centrifuge.

Advantages :

Available Features:

PRESSURE TEST : Leak Test is carried out on all Centrifuges. Machine is tested at a pressure of 40 mbar and pressure drop is restricted to below 6 mbar / hr.

Available Sizes (Basket Dia) : 18’’(460mm) to 60’’ (1524mm) (Special sizes can be designed on request)
Volume under Lip : 18 to 600 lit per batch.
Max Permissible Load * : 18 to 600 kg per batch.
Centrifugal Force : 358 to 2122 G units - depending on size of Basket
Speed of Basket : 650 to 2500 RPM- depending on size of Basket

We can also offer Cake Monitoring System which can shut off the feed valve when the desired level of cake thickness is reached.

Material of construction : Stainless Steel , Carbon Steel, Hastelloy, Rubber Lined , Fluoro Polymer Coating / Lining viz.- Halar (ECTFE), Teflon (PFA )

Lining/ Coating can be provided not only on the contact parts but also on the exterior body for prevention from spillage and corrosive atmosphere.

* The load indicated is based on mechanical design. However output per batch depends on various other factors and may be lower than permissible load.

Please fill up our Enquiry Form for your requirement.

  • img

         Partial Lid Opening

  • img

            Full Lid Opening

  • img

     Full Body Opening ( FBO )